Filter
Top Products
39
Set the HP Model 30/FC High Availability Disk Array Operating
Mode
The disk array is shipped from the factory with auto-trespass, which is one of the host mode parameters, turned on.
Auto-trespass must be turned off for the disk array to operate correctly on the Microsoft Windows NT operating system.
1. Turn off Auto-Trespass
a. Make sure that ArrayGUIde has been installed onto the HP NetServers.
b. From the
Start bar, select Programs.
b. Click
Windows NT Explorer.
c. Double-click
Program Files.
d. Double-click
CLARiiON.
e. Double-click
Agent.
f. Double-click the program file SetHM_a.exe.
g. Using this program to change the host mode parameters causes all disk arrays attached to the HP NetServers to
reboot automatically.
To part 6 of the HP NetServer Installation Guide.