Filter
Top Products
Front components
Item Component Function
(1) Power light
●
On: The device is on.
●
Blinking: The device is in Standby.
●
Off: The device is off.
(2) Power switch
●
When the device is off, slide the switch to turn on the
device.
●
When the device is on, briefly slide the switch to
initiate Hibernation.
●
When the device is in Standby, briefly slide the switch
to exit Standby.
●
When the device is in Hibernation, briefly slide the
switch to exit Hibernation.
If the device has stopped responding and Windows
shutdown procedures are ineffective, slide and hold the
power switch for at least 5 seconds to turn off the device.
To learn more about your power settings, select Start >
Control Panel > Performance and Maintenance >
Power Options.
(3) Drive light Blinking: The hard drive or flash drive is being accessed.
(4) Battery light
●
On: A battery is charging.
●
Blinking: A battery that is the only available power
source has reached a low battery level. When the
battery reaches a critical battery level, the battery
light begins blinking rapidly.
●
Off: If the device is plugged into an external power
source, the light turns off when all batteries in the
device are fully charged. If the device is not plugged
into an external power source, the light stays off until
the battery reaches a low battery level.
(5) Wireless light
●
Blue: An integrated wireless device, such as a WLAN
device, is on.
●
Amber: All wireless devices are off.
(6) Wireless switch Turns the wireless feature on or off, but does not establish
a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
8 Chapter 2 External component identification