Filter
Top Products
Keyboard
NOTE: For a comprehensive list of spare part numbers, see the Sequential part number listing
on page 24.
Description Spare part number Description Spare part number
For use with standard device
models
504611-xx1 For use with red-colored
HP Mini 1000 models only
509650-xx1
Before removing the keyboard, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
Battery on page 37).
Remove the keyboard:
1. Remove the Phillips PM1.6×4.0 screw (1) and the Phillips PM1.6×6.0 screw (2) that secure the
keyboard to the device.
2. Turn the device display-side up, with the front toward you.
3. Open the device as far as possible.
40 Chapter 4 Removal and replacement procedures