Filter
Top Products
Troubleshooting
106
8
Images are cut off, or excess
pages are printed.
If you are using paper smaller than the paper size selected in
the application, use the same size paper as that selected in the
application. If you cannot load paper of the correct size, use
the reduction function to reduce the image, and then print.
See the printer driver Help.
The image of the printout is dif-
ferent from the image on the
computer's display.
When [Toner saving] is checked under the [Print Quality] tab in
the printer driver's dialog box, the monochrome gradation
may appear differently.
See the printer driver Help.
Photo images are coarse. Some applications lower the resolution for making prints.
Fine dot pattern does not print. Change the [Dithering:] setting in the printer driver's dialog
box.
See the printer driver Help.
Black gradation is not natural. Select [Gray reproduction (Text/Line Art):] in the printer driver's
dialog box.
See the printer driver Help.
Solid lines are printed as broken
lines.
Change the [Dithering:] setting in the printer driver's dialog
box.
See the printer driver Help.
The print out image is missing
or partially blurred.
• Paper is damp. Use paper that has been stored properly.
See p.63 “Paper and Other Media”.
• Toner is almost depleted. When the “Add Toner” mes-
sage appears on the display panel, replace the toner car-
tridge.
See p.87 “Replacing the Toner Cartridge”.
• Condensation may have collected. If rapid change in tem-
perature or humidity occurs, use this printer only after it
has acclimatized.
The whole printout is blurred. • Paper is damp. Use paper that has been stored properly.
See p.63 “Paper and Other Media”.
• If you select [Toner saving] on the [Print Quality] tab in the
printer properties dialog box, printing is generally less
dense.
See the printer driver Help.
• Toner is almost depleted. When the “Toner depleted /
Add Toner” message appears on the display panel, re-
place the toner cartridge.
See p.87 “Replacing the Toner Cartridge”.
• Condensation may have collected. If rapid change in tem-
perature or humidity occurs, use this printer only after it
has acclimatized.
White streaks appear. • Toner is almost depleted. When the “Toner depleted
/Add Toner” message appears on the display panel, re-
place the toner cartridge.
See p.87 “Replacing the Toner Cartridge”.
Status Possible Causes, Descriptions, and Solutions