![](http://pdfasset.owneriq.net/6/7b/67b1ae41-a9af-4034-829b-41cb13d6669c/67b1ae41-a9af-4034-829b-41cb13d6669c-bg6f.png)
Removal and Replacement Procedures
Maintenance and Service Guide 5–9
6. Loosen the Phillips PM2.5×13.0 spring-loaded hard drive
retention screw 1.
7. Grasp the mylar tab 2 on the hard drive and slide the hard
drive to the right 3 to disconnect it from the system board.
8. Remove the hard drive 4 from the hard drive bay.
Removing the Hard Drive