![](http://pdfasset.owneriq.net/0/fa/0fa39e12-f85b-4e62-ad5c-4f7b09d75a79/0fa39e12-f85b-4e62-ad5c-4f7b09d75a79-bg7a.png)
5–32 Maintenance and Service Guide
Removal and Replacement Procedures
5. Turn the computer display-side up with front toward you.
6. Open the computer as far as possible.
7. Disconnect the LED board cable 1 from the system board.
8. Insert a flat-bladed screwdriver into the four notches 2 on the
front edge of the switch cover 3 and lift up until the cover
disengages from the computer.
9. Remove the switch cover.
Removing the Switch Cover
Reverse the above procedure to install the switch cover.