Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–45
2. Remove the two Phillips PM2.5×4.0 screws 1 that secure the
modem module to the system board.
3. Lift the front of the modem module 2 to disconnect it from
the system board.
4. Disconnect the modem module cable 3 from the
modem module.
5. Disconnect the modem cable 4 from the system board.
6. Remove the modem connector 5 from the clip in the base
enclosure.
✎
The modem module cable is included with the modem module
spare part kit and is also available in the Cable Kit, spare part
number 430883-001.
Removing the Modem Module and Cable
Reverse the above procedure to install the modem module.