Filter
Top Products
5–16 Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the memory/Mini Card module compartment cover
(Section 5.7).
3. Before disconnecting the wireless antenna cables, make note
of which cable is attached to which antenna clip on the Mini
Card module, then disconnect the auxiliary and main wireless
antenna cables 1 from the Mini Card module.
✎
The wireless antenna cables are available in the Wireless
Antenna Transceiver and Cable Kit, spare part number
409931-001.
4. Remove the two Phillips PM2.0×4.0 screws 2 that secure
the Mini Card to the computer.
5. Remove the Mini Card module 3 by pulling the card away
from the socket at an angle.
✎
Mini Card modules are designed with notches 4 to prevent
incorrect installation.
Removing a Mini Card Module
Reverse the above procedure to install a Mini Card module.