HP (Hewlett-Packard) Officejet 5600 All in One Printer User Manual


 
should be no background noise when recording this silent time. Try to
receive a fax again.
Note Some digital answering machines might not retain the
recorded silence at the end of your outgoing message. Play back
your outgoing message to check.
If your HP All-in-One shares the same phone line with other types of phone
equipment, such as an answering machine, a computer modem, or multi-port
switch box, the fax signal level might be reduced. This can cause problems
during fax reception.
To find out if other equipment is causing a problem, disconnect everything
except the HP All-in-One from the phone line, and then try to receive a fax. If
you can receive faxes successfully without the other equipment, one or more
pieces of the other equipment is causing problems; try adding them back one
at a time and receiving a fax each time, until you identify which equipment is
causing the problem.
If you have a special ring pattern for your fax phone number (using a
distinctive ring service through your telephone company), make sure that the
Answer Ring Pattern feature on your HP All-in-One is set to match. For
more information, see Change the answer ring pattern (distinctive ringing).
The HP All-in-One cannot send faxes, but can receive faxes
Solution
The HP All-in-One might be dialing too fast or too soon. You might need to
insert some pauses in the number sequence. For example, if you need to
access an outside line before dialing the phone number, insert a pause
following the access number. If your number is 95555555, and 9 accesses
an outside line, you might insert pauses as follows: 9-555-5555. To insert a
pause during dialing, press Redial/Pause, or press the Space (#) button
repeatedly, until a dash (-) appears on the control panel display.
You can also use monitor dialing to send the fax. This enables you to listen
to the phone line as you dial. You can set the pace of your dialing and
respond to prompts as you dial. For more information, see Send a fax using
monitor dialing.
The number you entered when sending the fax is not in the proper format or
the receiving fax machine is having problems. To check this, try calling the
fax number from a telephone and listen for fax tones. If you cannot hear fax
tones, the receiving fax machine might not be turned on or connected, or a
voice mail service could be interfering with the recipient's phone line. You
can also ask the recipient to check the receiving fax machine for any
problems.
Chapter 11
108 HP Officejet 5600 All-in-One series
Troubleshooting