Filter
Top Products
2 Connecting to a Netware 4.11 Server
Windows for Workgroups Version 3.11
listed above under the heading “Device Configuration.”
6 If changes are required, save those changes and exit.
7 Remove the Intel drivers diskette, insert Netware client for DOS and MS-
Windows disk 1.
8 Execute INST_DOS.EXE and enter yes to accept the agreement if using a
Vectra VL8, then continue to step 9.
If using a Vectra VL7 or VE7/VE8, follow the instructions below, then go
to step 18.
a Insert Netware Client for DOS and Windows Disk 1 and execute "A:\IN-
STALL."
b Change the settings to match the following and then option 6 to con-
tinue the installation.
• C:\NWCLIENT
•YES
•YES
• C:\WINDOWS
•No
• Intel EtherExpress ™ Pro/10 LAN Adapter (Use the driver from
the drivers disk at A:\)
c Insert the corresponding diskettes to finish the file transfer, and then
reboot the machine.
9 Accept the default products by pressing enter, and then press “F10” to
continue.
10 Select 16-bit LAN Drivers and hit the enter key.
11 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER”
and hit enter.
12 Insert the Intel ethernet drivers diskette, set the path to “A:\DOS\” and
press enter.
13 Select “Intel EtherExpress ™ PRO/10” and press enter.
14 Accept the default settings, press “F10” to continue, and verify the
following entries for the “Installation Configuration Summary”:
❒ YES