Filter
Top Products
FLEXlm Utilities
66 2-Tier Installation
lmhostid
Prints the correct hostid value on any machine supported by FLEXlm
lmhostid [type]
The type of the hostid to print. type must be one of long, idmodule, ether, or
string, and is currently used only on HP and SCO systems. On HP, type specifies
the ID module, the machine id as returned from the uname command, or the
Ethernet address. The HP default is long–uname. On SCO, long specifies the
pre-3.0 default, which was a 32-bit long int, while string specifies a string host,
which is the new default.
Output from lmhostid is similar to the following:
lmhostid – Copyright (C) 1997, Globetrotter Software, Inc.
The FLEXlm host ID of this machine is “1700abcd”
type
Description