Filter
Top Products
Scan film
This section contains information about using the transparent materials adapter (TMA)
to scan positives, including 35 mm slides, and negatives.
For tips about scanning film, see Tips for scanning transparent items.
Scan positives (such as 35 mm slides)
The transparent materials adapter (TMA) in this model enables you to scan as many
as two 35 mm slides at one time, depending on orientation. To scan 35 mm slides,
use the slide holder that is part of the built-in TMA.
1. Open the scanner lid.
2. Remove the negative strip holder, if present, from the slide holder.
3. Place the slides into the slide holder. Insert the slides with the top of the slides
pointing up and with the front of the slides facing you.
4. Close the scanner lid.
Note Make sure that the slides are flat and do not overlap. Do not press
the Scan Film button until the slides are loaded and the lid is closed.
5.
Press the Scan Film (
) button on the scanner, or click Scan Film in the HP
Solution Center.
6. In the HP Scanning dialog box, select Picture.
7. Select Scan positives, including 35 mm slides, using the TMA.
If you want to preview the scanned image, select the Show Preview check box
on the screen, or begin the scan from the HP Solution Center.
8. Click Scan.
9. Follow the instructions on the screen to finish scanning.
User's Manual 7