HP (Hewlett-Packard) series 2500 Switch User Manual


 
Index 7
Index
R
reboot 2-8, 2-10, 2-12, 9-83
reboot, actions causing C-3
reconfigure 2-10
redundant path 9-102, 9-108
spanning tree 9-103
report
See IGMP
reset 2-12, C-9
Reset button
restoring factory default configuration 11-20
reset port counters 10-8
resetting the switch
factory default reset 11-20
restricted access 8-6
restricted write access 8-6
RFC
See MIB
RFC 1213 8-3
RFC 1493 8-3
RFC 1515 8-3
RFC 1573 8-3
RFC 1757 8-3
RIPE NCC 5-15
RMON 8-3
RMON groups supported 8-13
RMON, extended 8-13
router 9-76, 9-97
gateway 5-6
router release A.09.70 9-76
RS-232 1-3
S
security 4-11, 5-16
authorized IP managers 7-30
per port 7-9
security violations
notices of 7-22
Self Test LED
behavior during factory default reset 11-20
serial number 10-5
server
access failure 9-103
Timep 5-6
setting a password 7-5
setting fault detection policy 4-24
setup screen 5-4
severity code, event log 11-11
slow network 11-6
SNMP 8-2
CLI commands 8-6
communities 8-4, 8-68-7
Communities screen 8-6
community
configure 8-4
IP 8-2
public community 8-58-6
restricted access 8-6
traps 8-3
SNMP-based download A-6
software version 10-5
sorting alert log entries 4-20
spanning tree 9-102
blocked link 9-110
blocked port 9-108
causing duplicate MAC address 9-75
description of operation 9-108
enabling from the browser interface 9-108
fast mode 9-109
global information 10-15
information screen 10-15
link priority 9-103
port cost 9-108
port priority automatic setting 9-108
problems related to 11-8
statistics 10-15
using with port trunking 6-15
VLAN effect on 9-73
stacking
benefits 9-59-6
minimum software version, other HP
switches 9-11
primary 9-48
standard MIB 8-3
starting a console session 2-4
static VLAN, convert to 9-77
statistical sampling 8-2, 8-13
statistics 2-7, 10-3
statistics, clear counters 2-12, C-9
status and counters
access from console 2-7
status and counters menu 10-4
status overview screen 4-7
STP
See spanning tree.spanning tree