Filter
Top Products
ENWW Using the On-Screen Display (OSD) 13
OSD MENU
Icon Main Menu Submenu Description
Brightness Adjustable scale Adjusts the brightness level of the screen. The
factory default range is 90.
Contrast Adjustable scale Adjusts the contrast level of the screen. The factory
default range is 80.
Color Selects the screen color. The factory default is
6500K or Custom Color, depending on the model.
Warm (5000K) Changes color to slightly reddish white.
Standard (6500K) Uses standard colors (default).
Cool (9300K) Changes color to slightly blueish white.
Custom (RGB) Selects and adjusts your own color scales:
• Red Color - sets your own red color levels
• Green Color - sets your own green color levels
• Blue Color - sets your own blue color levels
Image Control Adjusts the screen Image. (VGA Input only)
Auto Adjustment Automatically adjusts the screen Image.
Clock Minimizes any vertical bars or strips visible on the
screen background. Adjusting the Clock will also
change the horizontal screen Image.
Clock Phase Adjusts the focus of the display. This adjustment
allows you to remove any horizontal noise and clear
or sharpen the image of characters.
Horizontal Position Adjusts the position of the screen Image left and
right.
Vertical Position Adjusts the position of the screen Image up and
down.
Custom Scaling Selects the method on how displayed information
on the monitor will be formatted. Select:
• Fill to Screen - image fills the entire screen and
may look distorted or elongated because of
non-proportlonal scaling of height and width.
• Fill to Aspect Ratio - image Is sized to fit the
screen and maintains proportional Image.
Sharpness Adjusts the screen image to look sharper or soft.
Dynamic Contrast
Ratio
Turns Dynamic Contrast Ratio On or Off. The
factory default is Off.
OSD Control Provides a menu for adjusting the on-screen display
(OSD) controls.
Horizontal OSD
Position
Changes the viewing position of the OSD menu to
the left or right area of the screen. The factory
default range Is 97.
Vertical OSD Position Changes the viewing position of the OSD menu to
the top or bottom area of the screen. The factory
default range is 18.