Filter
Top Products
125
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages
System Info
Obtains information from the BIOS and the system’s Serial EEPROM. This
information includes: product name, BIOS version, serial number, number of
processors and speed, size of memory for each socket. The following
diagram shows how the System Info obtains its information.
Boot Steps
Shows the Power-On-Self-Test (POST) codes during the system startup.
The POST code is provided by the BIOS and is displayed on the LCD panel
as soon as it is available. If the system stops during the startup, the last
successful boot step POST code is displayed on the LCD. When Boot Steps
is selected, the POST step will be shown on the LCD status panel during the
subsequent boot processes.
To ensure that MaxiLife is ready to display the first POST codes as soon as
possible, the Pre-boot diagnostics are not executed when the system is
booted with the Boot Steps option selected. The following diagram shows
how Boot Steps obtains its information from the BIOS, and then displays a
POST error if needed.
Boot report
Runs a set of diagnostics assessing the system’s components. Results of the
tests are displayed on the LCD status panel, one after another, when the
LCD buttons are pressed.
System Info
strings in EEPROM
LCD Status Panel
BIOS
Write
MaxiLife
DMI Table
Info Services
HP Kayak XM600
“Write
POST
Code”
BIOS
MaxiLife
“Write
POST
ERROR”
This is a toggle item,
which is indicated with
a check mark
System Info
Boot Steps
Next Ok
HP KAYAK XM600
Post Code 24
Error
Post Code XX