Filter
Top Products
38
2 System Board
Accessory Board Slots
PCI Slots
There is a total of five Peripheral Component Interconnect (PCI)
32-bit, 33 MHz connectors on the system board.
The PCI slots accept 3.3 V and 5 V PCI 32-bit 33 MHz cards, and
Universal PCI cards (which are 3.3 V or 5 V compatible). Refer to
the table on the following page for the different PCI board
installations.
If an AGP Pro graphics card is present in the AGP Pro graphics slot
(Minitower models only), the PCI slot nearest the AGP slot
cannot be used.
The maximum supported power consumption per slot is 25W, either from
the 5V or the 3.3V supply and must respect the electrical specifications of
the PCI 2.2 specification. Total power consumption for the PCI slots must
not exceed 60 W.
The power consumption of each PCI board is automatically reported to the
system through the two Presence Detect pins of each PCI slot. These pins
code the following cases:
•
No accessory board in the PCI slot.
•
7 W maximum PCI board in the PCI slot.
•
15 W maximum PCI board in the PCI slot.
•
25 W maximum PCI board in the PCI slot.
The following table shows the various PCI board installations for the
different PCI slots:
PCI Card
3.3 V and 5 V
Universal
(3.3 V or 5 V compatible)
PCI Slot
32-bit/
33 MHz
64-bit/
33 MHz
32-bit/
33 MHz or 66 MHz
64-bit/
33 MHz or 66 MHz
Slots 1, 2, 3, 4 & 5
5 V, 32-bit/33 MHz
yes yes
1
1.
A 64-bit card can be installed in a 32-bit slot. However, this card will only operate in 32-bit
mode.
yes
yes
2
yes
1
yes
2
2.
A 66 Mhz card can be installed in a 33 MHz slot. However, this card will only operate in
33 MHz mode.