Hitachi 51G500S Computer Monitor User Manual


 
CHANNEL MANAGER
43
ON-SCREEN DISPLAY
Press CURSOR ̆ or ̄ to review more channels.
Press EXIT to quit the menu.
Move
SEL
Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8
Off --------
9 Off --------
Chan. Manager
Channel List
Move
SEL
Select
Channel Source
Auto Channel Scan
Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
SELECT
This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory
(SCAN), and which are protected b
y LOCK.
Channel
List
Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to
the remote control channel ̆ or ̄ buttons.
Scan
To add (Scan-On) or skip (Scan-Off) additional channels while in Channel List, CURSOR ̇ to highlight the channel number, then
CURSOR
̆ or ̄ to highlight other channels. Once the desired channel is highlighted, CURSOR ̈ to scan column, then CURSOR ̆
or ̄ to select ON or OFF.
Move
SEL
Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move
SEL
̇ Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move
Set
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Ch# Scan CH ID Lock
2 On --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
[]
[]
[]
Move
Set
Tune
Chan. Manager
Chan. Manager
Chan. Manager
Chan. Manager
Channel List
Channel List
Channel List
Channel List
SEL
Return
SEL
Return
NOTE: Lock feature cannot be selected or set in CHANNEL LIST.