Filter
Top Products
Drawing No. Sheet No. Revision
K6610091 5/43 2005/2/23
0.2.11 Protect the drive against shocks with the corrugated board and cushioning
material provided by the manufacturer, or with Hitachi Approved containers.
0.2.12 When mounting the drive, use the size of screws and the torque recommended
in this manual. If non-recommended size of screws and torque are used, it may
cause catastrophic failures.
0.2.13 Do not press top cover and bottom PCB of the drive. It may cause catastrophic
failures.
0.2.14 Read and follow all instructions and cautions described on the top cover of the
drive, and in the chapter, Precautions for handling, in this manual.
0.2.15 In case of fluctuations in the DC power (spikes, momentary shut off, etc.), the
data being recorded or to be recorded from buffer memory are not assured.
0.2.16 If you find a smoke or a bad smell generating from the product, stop using it,
turn the power off, and see your sales contact.
Warranty and Limited Liability
This product is sold with a limited warranty and specific remedies are available to the
original purchaser in the event the product fails to conform to the limited warranty.
Hitachi GST liability may be further limited in accordance with its sales contact.
In general, Hitachi GST shall not be responsible for product damages caused by natural
disasters, fire, static discharge, misuse, abuse, neglect, improper handling or installation,
unauthorized repair, alteration, or accident. In no event will Hitachi GST be liable for
loss of data stored on product.
Hitachi GST shall not be liable for any special, incidental or consequential damages,
even if informed of the possibility thereof in advance.
Please see your sales contact for a complete statement of warranty rights, remedies
and limitation of liability.
To use this product safely (Continued)
Caution