Homelite 2400C Printer User Manual


 
10/10/03
CHAPTER 5 PJL - 35
Variables Description Sample Value Range
TIMESETMIN * Clock: minute setting 0 to 59
TIMESETSEC * Clock: second setting 0 to 59
TIMESTYLE * Sets the display style of the clock. YMD (YYYY/MM/DD hh/mm),
MDY (MM/DD/YYYY hh/mm),
DMY (DD/MM/YYYY hh/mm)
SUMMERTIME * Clock: summer time setting OFF, ON
ZONESET * Clock: time zone setting OFF, ON
TIMEZONE * Clock: time setting of time zone -24 to +24
NOTE:
The variables marked * are available for HL-2400Ce, HL-3400CN, HL-2600CN and HL-3450CN only.
2. PCL-Specific Variables
The following values are PCL (HP LaserJet emulation) specific and can be set and requested using PJL.
These variables must be set using the LPARM : PCL option.
Variables Description Sample Value Range
FONTSOURCE The valid values for
FONTSOURCE are
I (Internal Fonts)
C (Cartridge Fonts)
C1 (Card Fonts)
S (Permanent Soft Fonts)
If the specified value becomes
invalid, it is automatically changed
to the default value.
I, C, C1, S,
FONTNUMBER Font number. This value can be
seen on the Print Font Test selected
from the Control Panel. This value
is automatically changed to the
lowest value whenever the
FONTSOURCE setting is changed.
0, 1, 2, ..n
PITCH Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
0.44, 0.45, 99.99
PTSIZE Height of the default font in units
of points. The point size can be
specified to a quarter of a point
4.00, 4.25, .......999.75
SYMSET Symbol set ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852, PC8TK,
WINL1, WINL2, WINL5, DESKTOP,
PSTEXT, VNINTL, VNUS,
MSPUBL, MATH8, PSMATH,
VNMATH, PIFONT, LEGAL, ISO2,
ISO4, ISO6, ISO10, ISO11, ISO 14,
ISO15, ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69, ISO84,
ISO85, WIN30, HPGERM, HPSPAN,
MCTEXT
3. PostScript-Specific Variable
The currently defined PostScript specific variable is listed as follows. This variable can be set using the
LPARM : POSTSCRIPT option.
Variable Description Sample Value Range
PRTPSERRS The printing of a PostScript error
page is enabled or disabled by this
variable
OFF, ON