Homelite 2400C Printer User Manual


 
10/10/03
CHAPTER 8 BAR CODE CONTROL - 2
C
ONTENTS
1. INTRODUCTION...................................................................................................................... 3
2. PRINT BAR CODES OR EXPANDED CHARACTERS........................................................... 4
3. DEFINITION OF PARAMETERS............................................................................................. 5
3.1. Bar Code Mode............................................................................................................................... 5
3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading....... 5
3.3. Bar Code Scaling (Width only)........................................................................................................ 6
3.4. Bar Code Human Readable Line On or Off .................................................................................... 6
3.5. Quiet Zone ...................................................................................................................................... 6
3.6. Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing Units............................ 6
3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis............ 7
3.8. Bar Code & Expanded Character Offset in the Y-axis .................................................................... 7
3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height................................ 7
3.10. Expanded Character, Line Block Drawing & Box Drawing Width ................................................. 7
3.11. Expanded Character Rotation....................................................................................................... 7
3.12. Bar Code Data Start...................................................................................................................... 8
3.13. Box Drawing.................................................................................................................................. 9
3.14. Line Block Drawing ....................................................................................................................... 9
3.15. Expanded Character Data Start.................................................................................................... 9
4. EXAMPLE PROGRAM LISTINGS......................................................................................... 10