Homelite 2400C Printer User Manual


 
10/10/03
CHAPTER 2 "PCL" - 8
Esc(s#V, Esc)s#V Selecting the height 46
EscCR!#H, EscCR!#V Scaling the scalable fonts vertically or horizontally 46
Esc(s#S, Esc)s#S Selecting the style 46
Esc(s#B, Esc)s#B Selecting the stroke weight 47
Esc(s#T, Esc)s#T Selecting the typeface 47
Esc&p#X Transparent print data 49
Esc&d#D, Esc&d@ Underlining text 49
Esc&*c#D Font ID 50
Esc*c#F Operations on downloaded fonts 50
Esc(#X, Esc)#X Selecting a downloaded font 50
Esc)s#W Sending the font descriptor 51
Esc*c#E Sending a character code 63
Esc(s#W Sending a character descriptor and data 63
Using graphics 69
Esc*v#N Set source transparency 69
Esc*v#O Set pattern transparency 70
Esc*c#G Set area fill identity 71
Esc*c#W User-defined pattern command 72
Esc*p#R Set pattern reference point 72
Esc*c#Q User-defined pattern control 73
Esc*v#T Set pattern type 73
Esc*c#A, Esc*c#H Set rectangle width 75
Esc*c#B, Esc*c#V Set rectangle height 75
Esc*c#P Draw filled rectangle 75
Esc*t#R Set raster resolution 77
EscCR ## Set high resolution control 77
Esc*r#F Set raster image orientation 77
Esc*r#T Set raster area height 78
Esc*r#S Set raster area width 78
Esc*b#Y set raster y-offset 78
Esc*b#M Set compression mode 78
Esc*r#A Start raster transfer 83
Esc*b#W Send raster data 83
Esc*b#C Compress transfer graphics 83
Esc*rB End raster transfer 83
Esc*rC End raster transfer 83
Esc*b##W Horizontal 1200-dpi image format mode (Raster Graphic Mode 1027) 85
Esc%#B Enter HP-GL/2 mode 87
Esc*c0T Set picture frame anchor point 88
Esc*c#Y Set picture frame vertical size 88
Esc*c#X Set picture frame horizontal size 88
Esc*c#L Specify vertical plot size 88
Esc*c#K Specify horizontal plot size 88
Macros 89
Esc&f#Y Macro ID 90
Esc&f0X Start macro definition 90
Esc&f1X End macro definition 90
Esc&f2X Execute macro 91
Esc&f3X Call macro 91
Esc&f4X Enable macro for overlay 91
Esc&f5X Disable macro for overlay 91
Esc&f6X Delete all macros 92
Esc&f7X Delete all temporary macros 92
Esc&f8X Delete macro 92
Esc&f9X Make macro temporary 92
Esc&f10X Make macro permanent 92
Esc&f1030X Delete all macros from the storage device 92
Esc&f1036X Delete macro from the storage device 92
Esc&f1038X Save macro into the storage device 92
EscCR!#E Execute data 93
Esc&b#W AppleTalk configuration 93
EscCR!1234#M MIO video I/O port control 94