Filter
Top Products
84 301C User Manual M-510324
Honeywell 7/10
System Programming
Wireless Network Menu
The following table provides the list of data displayed for each node.
Use the right or left keypad arrows to navigate the possible nodes, then
use the up or down keypad arrows to navigate the entire list of data for
the selected node.
# Title Value Description
4. Link Quality 1 Percentage of signal strength (0-100%) for
a node, relative to parent signal quality
5. Log Mod Log Indicates whether the node is in debug
mode
6. Net Addr 0009 Displays the node’s (hexadecimal) network
address (seen in 1st screen)
7. SWU slot 1 Displays the SWU slot used to transmit
beacon
8. # of Parents 1 Displays the number of current parents for
a given node, from 0 - 3.
9. DP Id 0 Displays the ID associated to the default
parent
10. DP Net Addr 0 Displays the default parent network
address
11. DP LQI 2 Displays the link quality with the default
parent:
0 = no useful link/1 = weak link/2 = strong
link
12. DP Retries (?) Displays the number of default parent
retries
13. DP BM 0 Displays the number of parent beacons
missed over last beacon period
14. DP LC 256 Displays the time since lasct
communication to default parent (in
milliseconds)
15. AP1 ID (?) Displays the ID associated to the
alternative parent 1
16. AP1 Net Addr (?) Displays the alternative parent 1 network
address
17. AP1 LQI 16 Displays the link quality with alternative
parent 1:
0 = no useful link/1 = weak link/2 = strong
link