Filter
Top Products
18
INSTALLATION
CABLE INSTALLATION (INTERFACE SPECIFIC)
FULL SPEED USB
9. Turn on the host system.
10. Configure the StratosH to match the host system’s USB parameters.
For Single Cable Applications:
The IBM OEM Full Speed USB English and Metric bar codes are located in the MS2xxx Stratos Series
Configuration Addendum (PN 00-02034x) under Scanner Configuration Bar Codes: Single Cable Protocols for
POS Compatibility, IBM OEM Full Speed USB.
For Dual Cable Applications:
The IBM OEM Full Speed USB Communication Defaults bar code is located in the MS2xxx Stratos Series
Configuration Addendum (PN 00-02034x) under Scanner Configuration Bar Codes: Dual Cable Scanner
Configuration Bar Codes, IBM OEM Full Speed USB Communication Defaults and IBM OEM Full Speed USB
Protocols.
These features can only be used for Dual Cable Applications.
FOR USB SERIAL EMULATION MODE OR KEYBOARD EMULATION MODE ONLY
11. Configure the StratosH for Bi-Directional USB Serial Emulation Mode or USB Keyboard Emulation Mode by scanning
the appropriate configuration bar codes in the USB section of the MetroSelect Configuration Guide (
PN 00-02407x).
These features can only be used for Dual Cable Applications. The IBM OEM Full Speed USB
Communication Defaults bar code listed in step 10 must be scanned before scanning one of these bar codes or
this feature will not work properly.