Filter
Top Products
2. Set the dipswitches on the PRO22IC (S1) to:
Baud Rate is 38, 400 bps
Flow Control is ON
Panel Address is 1
S1
8 OFF (PASSWORD OFF)
7 ON (BAUD RATE)
6 ON (BAUD RATE)
5 ON (FLOW CONTROL)
4 OFF (PANEL ADDRESS)
3 OFF (PANEL ADDRESS)
2 OFF (PANEL ADDRESS)
1 ON (PANEL ADDRESS)
3. Set the jumpers on the PRO22IC
Jumper
J14 OFF (NETWORK ENABLED)
J12 ON (PORT 2 EOL ACTIVE)
J13 ON (PORT 3 EOL ACTIVE)
J4 2 AND 3 ON
J5 2 AND 3 ON
J6 2 AND 3 ON
J9 ON
4. Mount the PRO22EN to the PRO22IC (Mounting instructions
on Page 15)
5. Finish Installation of PRO-2200. Refer to Installation manuals
6. Connect the Networked Computer to the Ethernet Card using
CAT5 cable.