Huawei E960 Network Router User Manual


 
2
Indicator
Signal strength
y Fast blinking in red: SIM card faults (SIM card does not exist or
e
the PIN code is not verified)
y Steady on and in red: signal strength in level one (weak)
y Steady on and in yellow: signal strength in level two or three
(middle)
y Steady on and in green: signal strength in level four or fiv
(strong)
Network mode
EDGE data service connected
y Fast blinking in gr nloading the upgrade mode
twork
e connected
y Steady on and in cyan: HSDPA data service connected
Note: When the gateway is initialized, it is steady on and in
y Double blinking in green: searching the network
y Blinking in green: registering with the 2G network
y Steady on and in green: GPRS/
een: Dow
y Blinking in blue: registering with the 3G ne
y Steady on and in blue: WCDMA data servic
green for three seconds.
Button
ON/ OFF Press and hold it to power on or off the E960
Interfaces
y Power adapter/USB cable interface: When connected with the power adapter, the E960
PC with a USB data cable, the
her network
e
u
functions as a wireless gateway. When connected to the
E960 functions as a USB modem.
y Ethernet cable interface: Insert an Ethernet cable connected to the PC or ot
equipments.
y Phone cable interface: Insert a phon cable connected with a telephone to realize the
voice service.
PC Configuration Req irements
The recommended PC configurations for using the E960 are as follows:
CPU: Pentium 500 MHz or above
y Memory: 128 MB RAM or above
y Hard disk: 100 MB available space
y Operating System: Windows 2000,
Windows XP, or Windows Vista
y LCD resolution: 800*600 pixel or above,
recommended 1024*768 pixel
y Interface: standard USB interface
y Internet Browser: Internet Explorer 6.0 or
above, Firefox 1.5 or above, Netscape 8.0 or
above
y