Filter
Top Products
11
etwork connection is created, to access the network,
double-click the icon for the dial-up connection, and then click Connect in the
g the Wireless Network
You need to perform the preceding operations only once for creating a network
connection. After the n
displayed dialog box.
4 Configurin
Connection
If a wirele
computer t
ss network adapter is installed on your computer, you can connect you
o the HG521 through a wireless connection.
other. For details, see the installation guide provided by the wireless
network adapter provider.
The hardware installation methods and driver installation methods of
wireless network adapters p
rovided by different companies vary from each
After the installation of a wireless network adapter, you need to configure the wirele
network connection on your computer. You can configure the wireless network
connection through the software provided with the wireless network adapter. If the
ss
ig ws (taking the Windows XP
Step 1
g
r, and then press Enter.
and the password, and
To set the
authentica
Web-based configuration utility,
n combo box.
A pre-shared key text box.
Windows XP operating system is used, you can also configure the wireless network
connection through the wireless configuration software provided by Windows XP.
To conf ure the wireless network connection, do as follo
operating
system as an example):
Lo in to the Web-based configuration utility.
1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1
in the address ba
2. In the displayed dialog box, enter the user name
then click OK.
By default, both the user name and the password are admin.
Step 2
Set the wireless network name and access password of the HG521.
wireless network name and the access password, do as follows (taking the
tion type WPA-PSK as an example):
1. In the navigation tree on the left of the
choose Basic > LAN > WLAN.
2. Select the Enable WLAN check box.
3. Select the SSID1 from the SSID index drop-dow
4. Enter a wireless network name in the SSID text box.
5. Select the Enalbe option box of SSID.
6. Select WPA-PSK from the Security drop-down combo box.
7. Enter an access password in the WP