Filter
Top Products
19
Indicator Status Description
Blinking
Data is being transmitted through the Ethernet
interface.
Solid on The Ethernet connection is set up.
LAN
Off The Ethernet connection is not set up.
Blinking z The wireless network function is enabled.
z Data is being transmitted through the WLAN.
Solid on z The wireless network function is enabled.
z No data is being transmitted through the WLAN.
WLAN
Off The wireless network function is disabled.
7.2
Interfaces and Buttons
Interface or
Button
Description
POWER It is used to connect the power adapter.
LAN It is used to connect to the Ethernet interface on the computer.
RESET
You can press and hold the RESET button for over six seconds
to restore the default settings of the HG521.
Note: After you restore the default settings, your customized
data is lost. Therefore, use this function with caution.
ADSL It is used to connect to the MODEM interface on the splitter.
It is the power switch and is used to power on or power off the
HG521.
7.3
Default Settings
Parameter Setting
IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN interface 255.255.255.0
User name used for logging in to the Web-based
configuration utility
admin