3 Setting the Network-Access Parameters
The HG532 supports ADSL2+ uplink and High-Speed Packet Access (HSPA) uplink
through Huawei HSPA data card. Realizes dynamic mutual backup of voice and data
services through the DSL link and HSPA link.
3.1
Configuring the HSPA uplink
When the HG532 is working through Huawei HSPA data card, you need to install the
Huawei HSPA data card on the HG532 so that your PC can connect to the Internet
through HSPA uplink. To create a HSPA uplink connection, do as follows:
Step 1
Log in to the Web-based configuration utility.
1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1
in the address bar, and then press Enter.
2. In the displayed dialog box, enter the user name and the password, and
then click Login.
By default, both the user name and the password are admin. After the user
name and the password are verified, you can access the Web-based
configuration utility.
Step 2
Click
Basic
>
WAN
in the navigation tree to display the
WAN Connection
Page.
Step 3
Click the connection whose access type is UMTS.
Step 4
Select
Enable
for
WAN connection
.
Step 5
Enter the APN and the Dial number that are provided by the network operator
in the
APN
text box and the
Dial number
text box.
Step 6
Enter the user name and password in the
User name
and
Password
text
boxes that you can configure.
Step 7
Click the
Submit
button to finish the UMTS settings.
If you want to verify the PIN code of your SIM card, then do as follows:
Step 1
Click
Advanced
>
PIN
in the navigation tree to display the
PIN
Page.
Step 2
Enter the original PIN number in the
PIN
text box.
Step 3
Click the
Submit
button to finish the settings on the
PIN
Page.
Use the default values for the other parameters. In general, they do not
need to be configured.
7