Filter
Top Products
The WPS applications may vary with different types of wireless network
adapters. For details about the configuration and operations of the WPS
application, refer to the operation guide provided by the application
provider.
5.5
Changing the IP Address Used for Logging
In to the Web-Based Configuration Utility
To make the login IP address easy to remember, you can change the IP address after
logging in to the Web-based configuration utility.
To change the IP address, do as follows:
Step 1
Log in to the Web-based configuration utility.
Step 2
In the navigation tree on the left, choose
Basic
>
LAN
.
Step 3
Choose the
DHCP
page.
Step 4
Enter a new IP address as desired in the
IP address
text box. Then, enter a
subnet mask in
Subnet mask
.
Step 5
Click
Submit
.
To log in to the Web-based configuration utility after you change the IP
address successfully, you need to launch the Internet Explorer, and then
enter the new IP address in the address bar. Ensure that the IP address of
the computer is in the same network segment as that of the HG532 so that
the computer can access the Web-based configuration utility.
5.6
Restoring Default Settings
After you restore the default settings, your customized data is lost.
Therefore, use this function with caution.
You can quickly restore the default settings of the HG532 by pressing the RESET
button on the rear panel. To restore the default settings, press and hold the RESET
button for over six seconds after the HG532 is powered on, and then release the button.
In addition, you can restore the default settings of the HG532 through the Web-based
configuration utility. To restore the default settings through the Web-based
configuration utility, do as follows:
15