Filter
Top Products
Step 1
Log in to the Web-based co
nfiguration utility.
.
A
pre-shared key
text box.
Step 7
Select
TKIP
from the
WPA
encryption
drop-down combo box.
Step 2
In the navigation tree on the left, choose
Basic
>
LAN
Step 3
Choose the
WLAN
page.
Step 4
Enter a wireless network name in the
SSID
text box.
Step 5
Select
WPA-PSK
from the
Security
drop-down combo box.
Step 6
Enter an access password in the
WP
Step 8
Click
Submit
to save the settings.
5.4
Setting Up a Wireless Connection Through
the WPS Protocol
The HG532 supports the WPS technology. By using this technology, the HG532 can
connect to a wireless terminal easily and safely. During the connecting process, you do
not need to enter the name and access password of the WLAN network.
To use the WPS function, your wireless network adapter should support the WPS
function. Meanwhile, you need to set the encryption type of the WLAN to WPA-PSK
or WPA2-PSK.
To set up a wireless connection by using a wireless network adapter through the W
do as follows:
PS
protocol,
Step 1
onfiguration utility.
n tree on the left, choose Basic > LAN.
the WPS
function. After a few seconds (normally 10s to 120s), the WPS indicator of the HG532
turns solid on in orange (this state lasts for 300s), which indicates that the connection
between the HG532 and the wireless network adapter is set up successfully.
Enable the WPS function.
1. Log in to the Web-based c
2. In the navigatio
3. Choose the WLAN page.
4. Select Enable for WPS.
5. Click Submit.
Step 2
Launch the WPS client software of the wireless network adapter of the
computer. Perform operations based on the software user interface to display
the interface of searching for the wireless network.
Step 3
Press the WPS button on the side panel of the HG532 within two minutes.
The WPS indicator of the HG532 blinks in green, which indicates that the connection
between the HG532 and the wireless network adapter is being set up through
14