Filter
Top Products
17
3. Move the computer closer to the HG658c.
4. Place the HG658c and the computer in another direction.
5. Try to avoid using wireless network connection during thunderstorms.
What can I do if the wireless network is not encrypted but the computer
cannot connect to the wireless network?
1. Delete wireless network configuration from the computer.
The following example uses a computer running the Window XP operating
system:
1) Choose Start > Control Panel. Double-click Network Connections.
2) In the Network Connections window, right-click Wireless Network
Connection, and choose Properties.
3) In the Wireless Network Connection Properties dialog box, click
the Wireless Networks tab.
4) In the Preferred Networks area, select a wireless network, and click
Remove.
5) Delete all the other wireless network connections from the Preferred
Networks area.
6) Click OK.
2. Set up an unencrypted wireless network connection.
Does the WPS function have any special requirements on the wireless
encryption settings of the HG658c?
The WPS function can be used only when the security mode of the wireless
network is set to WPA2-PSK, or WPA-PSK/WPA2-PSK, and the SSID is set
to SSID1. It is recommended that you set the security mode to
WPA-PSK/WPA2-PSK.
What can I do if I cannot set up a wireless connection between the HG658c
and the computer by pressing the WPS button?
1. Check that only one computer tries to connect to the HG658c using the
WPS function at a time.
2. Check that the wireless network function and the WPS function in PBC
mode are enabled on the HG658c.