Filter
Top Products
WS322 300Mbps Wireless Router
User Guide
1 Product Overview
1-3
Reset button After the WS322 is powered on, press and hold the Reset
button for 6s or more to restore the WS322 to its factory
settings.
Restoring the WS322 to its factory settings will erase your
user-defined data.
Status indicator Shows the WS322 working status. For details, see section
1.2.2 Indicators.
Signal strength
indicator
Shows the network signal strength. For details, see section
1.2.2 Indicators.
ETH port Connects the WS322 to a network device.
Table 1-2 Using the WPS Button for Quick Configuration
Function Operation
WPS
connection
Press and hold the WPS button more than 1 second and less than
3 seconds, and press the wireless client's WPS button within 2
minutes.
When the
status indicator turns from blinking to steady on,
the connection is set up.
Switching the
working mode
Press and hold the WPS button until:
the indicator starts blinking to switch to WiFi Router
mode.
the indicator starts blinking to switch to WiFi Client
mode.
the indicator starts blinking to switch to WiFi
Repeater mode.