Filter
Top Products
2-60 Bluetooth PC Card from IBM: Installation and User’s Guide
4. Under the Loop Mode heading, select Single Loop (to run the test once) or
Infinite Loops (to run the test multiple times).
5. To start the test, click Run.
Note: If you selected Infinite Loops, the test runs until you click Stop.
In Loop Count you can see the number of loops tested. The number of Errors
should always be zero. If the test shows one or more errors, your hardware has
probably not been installed correctly. Do the following:
• Be sure that the hardware is installed correctly. See the Installation guide on
page 1-1 for information on installing the PC Card.
• Restart your computer.