Filter
Top Products
Modem Ring Detect: If your computer has a wake-on-ring supported
modem and you want the computer to turn on automatically when a
ring is detected on the modem, set this feature to Enabled.
Wake Up on Alarm: With this feature, you can specify a date and time
at which the computer will be turned on automatically. This can be
either a single event, a daily event, or a weekly event.
PCI Wake Up: If this setting is enabled, your computer turns on in
response to wake-up requests from PCI devices that support this
feature.
To set automatic power-on features, follow these steps:
1. Start the Configuration/Setup Utility program (see “Starting and using
the Configuration/Setup Utility program” on page 3).
2. Select Power Management and press Enter.
3. Select Automatic Power On and press Enter.
4. Select the menu item for the feature you want to set. Use Left Arrow
(←) or Right Arrow (→) to select either Enabled or Disabled. Press
Enter.
5. Select Startup Sequence for the feature. Use Left Arrow (←) or Right
Arrow (→) to select either Primary or Automatic. If you select
Automatic, make sure Automatic Power On Startup Sequence in the
Startup Sequence menu is set to enabled. Otherwise, the system will
use the Primary startup sequence.
6. Press Esc until you return to the Configuration/Setup Utility program
menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu and press Enter.
8. To exit from the Configuration/Setup Utility program, press Esc and
follow the instructions on the screen.
Quick reference for network-related settings
Some models come with an Ethernet adapter. The following instructions
are guidelines to help you if your computer is using an Ethernet adapter to
network with other computers.
The following tables are not intended to help determine which settings to
choose. They are intended only to help you quickly find the steps
necessary to get to the choices for specific network settings. You can then
view the current setting or select a different setting. When finished, you
can either save the settings and exit the utility program or exit without
saving the settings.
15