Filter
Top Products
Symptom-to-FRU error messages
Symptom or error FRU or action, in
sequence
The CD-ROM does not
work.
Make sure that:
The computer power is
turned on and a
compact disc is in the
CD-ROM drive.
The CD-ROM drive
connector is firmly
connected to the
computer.
The CD-ROM drive
tray is firmly closed.
The device drivers are
correctly installed.
If the CD-ROM drive in the
docking station still does not
work, do the following:
1. Click on Start.
2. Move the cursor to
Programs and
ThinkPad; then click
on ThinkPad
Configuration.
3. Click on Docking
Station.
4. Make sure that you
checked Enable IDE
device in the docking
station.
Note: Do not use IRQ
11 and 15 for the PCI
device setting.
5. Click on OK.
If the problem remains,
replace the following FRUs
in order:
1. CD-ROM drive.
2. System board.
26 ThinkPad 600X Hardware Maintenance Manual