Filter
Top Products
Repair Information 87
NOTE: Installing the processor
•
Place the ZIF socket release lever to the release
(up) position.
•
Insert the new processor, matching the notched
corner of the processor with the pin 1 indicator on
the socket.
•
Push down the lever to lock the processor to the
socket.
•
Place the processor heat sink fan over the
processor.
•
Insert one side of fan brace onto the ZIF socket
•
Secure by latching the other side to the ZIF socket.
•
Reconnect the processor fan sink cable to the
connector FN1 on the system board.
•
Replace the fansink stopper.