Filter
Top Products
General Information 13
The following table lists specific keys on the keyboard
that will help you move through the Setup menus:
Changing Parameter Settings
In the Setup menus, the configuration information that
you can change is enclosed in brackets like these: [ ].
You cannot change any information that is not
enclosed in brackets. Use the up- or down- arrow
keys to highlight options then press Enter to display a
menu. When changing the setting of a particular
parameter, highlight the setting then use the left- or
right- arrow key to change the setting. Refer to the
Configuration/Setup Utility help for details on the
configurable parameters in each menu.
Keys Function
Down- or up-
arrow key
Use these arrow keys to highlight
an option on the menu. (Press the
Enter key to choose the option.)
Left- or right-
arrow key
Use these arrow keys to make a
selection and change an option's
setting. On some menus, you can
use these keys to move from one
field to another.
F1 Press this key if you want help for a
selected menu option.
Esc After viewing or making changes to
the settings on a menu, press this
key to exit the menu.
Enter Press this key to choose a
highlighted option from a menu
F9 Press this key if you want to reload
the current settings for a line
F10 Press this key if you want to load
the factory default settings from the
selected brackets.