IBM 6 MPLS Switch User Manual


 
Specialized Models User Guide 6 MPLS Model User Guide
SPM-6-2 Modeler/Release 10.0
MPLS models are implemented based on information available from the
following sources.
Table 6-2 Reference Documents
Model Features Document
Traffic Engineering
MPLS TE RFC-2702
Requirements for Traffic Engineering
Over MPLS
FECs RFC-3031
Multiprotocol Label Switching
Architecture
IGP shortcuts draft-hsmit-mpls-igp-spf-00
Label Switched Paths
Dynamic LSPs
Static LSPs
RFC-3031
Multiprotocol Label Switching
Architecture
LSP routing
OSPF TE
IS-IS TE
RFC-2676
QoS Routing and OSPF Extensions
Label distribution
LDP RFC-3036—LDP Specification
CR-LDP RFC-3212—Constraint-based LSP Setup Using LDP
RSVP-TE RFC-3209—RSVP-TE: Extensions to RSVP for LSP
Tunnels
PP-VPNs
A framework for layer-3 PP VPNs RFC-2547—BGP/MPLS VPNs
BGP/MPLS VPNs draft-ietf-ppvpn-framework-05
Quality of Service
QOS Architecture RFC-2475—An Architecture for Differentiated
Services
MPLS Support of Differentiated
Services
RFC-3270—Multi Protocol Label Switching
draft-ietf-mpls-diff-ext-08
Restoration and Resiliency
Fast reroute with bypass tunnels
LSP protection with ingress backup
draft-ietf-mpls-rsvp-lsp-fastreroute-00
End of Table 6-2