Filter
Top Products
Specialized Models User Guide 6 MPLS Model User Guide
SPM-6-6 Modeler/Release 10.0
Figure 6-5 Mapping EXP Bits to Drop Precedence and PHB
Router Attributes
Some of the important MPLS Parameters attributes set on routers are described
below.
Traffic Mapping Configuration
This attribute specifies bindings between FECs and LSPs. Each row of the
Traffic Mapping Configuration table specifies a distinct traffic engineering (TE)
binding. Each TE binding specifies the FEC, traffic trunk, and LSP that is applied
to the label of the incoming packet.
Only previously defined values appear in the attribute pull-down lists. If no
values appear in the attribute pull-down lists, verify that you have defined the
FECs and traffic trunks in the MPLS Configuration object, and that the LSPs
appear in the network path browser.