Filter
Top Products
FRU information (service only) 115
Removing the shuttle
1. Power-off the server, if it is on.
2. Disconnect the power cord for each power supply from the electrical outlet.
Attention: The presence of ac standby power might result in damage to the
hardware unless you disconnect the power cord for each power supply from the
electrical outlet.
3. Remove the top cover (see “Removing the top cover” on page 59).
4. Disconnect the shuttle (see “Disconnecting the shuttle” on page 108.)
5. Place one hand on the handle at the front portion of the shuttle, and place the
other hand on the ledge at the rear of the shuttle.
6. Lift the shuttle at an angle with the rear of the shuttle being removed first and
remove the shuttle from the server.