IBM ETX-DB-ATX Computer Hardware User Manual


 
ETX-DB-ATX
3
3.16 PCI BUS Interface ................................................................. 20
3.17 ISA BUS Interface ................................................................. 22
3.18 ATX power connector ............................................................ 23
3.19 Front Panel Pin Header......................................................... 23
3.20 Digital IO connector............................................................... 23
3.21 Keyboard & PS/2 Mouse Connector..................................... 24
ETX-DB-ATX
4
Introduction
ETX-DB-ATX is designed for ETX module computer board
applications
The ETX-DB-ATX provides four 100 pins FX8 series connector
to connect ETX module computer board. It also provides all kind of
input/output port, included two parallel ports, two serial ports
RS-232, four USB ports, three audio phone jacks, one VGA CRT
connector, one 48 bits two channels LVDS connector, two PCI
interface slots, one ISA interface slots, two channel IED interface
connectors, one floppy interface connector, one TV-out port, one
IR port, and a PS/2 keyboard/mouse interface.
1.1 Specifications
*Display interface:
Support CRT and LVDS LCD displays simultaneously
*Audio interface:
Connector: Speaker, Mic-in, Line-in.
*IDE interface: supports two PCI Enhanced IDE hard drives
*FDD interface: support up to two floppy disk drives, 5.25”
360KB and 1.2MBand/or 3.5”720KB, 1.44MB, and
2.88MB(Multi function with Parallel port)
*Serial ports: Two RS232 ports
*Parallel port: One Parallel port can supports SPP/EPP/ECP
mode (Multi function with Floppy interface)
*PS/2 Mouse/Keyboard interface: easy connection to a
keyboard or PS/2 mouse
*USB interface: four USB ports.
*PCI interface: Two PCI slots.
1