Filter
Top Products
The computer also exits suspend mode when timer condi-
tions are satisfied for entering hibernation mode.
Hibernation Mode: For Windows NT or OS/2
user:
A Windows NT or OS/2 user cannot create a hibernation
file in a Windows NT or OS/2 system that uses the
NTFS/HPFS format system. If you want to use hibernation
mode, you should reinstall Windows NT with a FAT format
system. Also, if boot manager is installed, the computer
cannot enter hibernation mode.
Note: Before using hibernation mode, you need a
hibernation file.
In hibernation mode, the following occurs:
The system status, RAM, VRAM, and setup data are
stored on the hard disk.
The system is powered off.
Notes:
1. In the ThinkPad Configuration program, the computer
can be set to suspend when docked.
2. The computer cannot enter hibernation mode when it
is attached to the ThinkPad Port Replicator with
Advanced Etherjet Feature.
Events that cause the computer to enter hibernation mode:
Hibernation mode requested by function key
(Fn+F12).
Timer conditions are satisfied in suspend mode when
hibernate by timer is enabled.
A critically low battery condition occurs.
The power switch is pressed. (BIOS Setup)
The compute exits hibernation mode and resumes opera-
tion when the power-on switch is pressed. When power is
turned on, the hibernation file in the boot record on the
hard disk drive is read and the system status is restored
from the hard disk drive.
The following events cause the computer to resume opera-
tion from hibernation mode.
The power switch is pressed.
The real time clock alarm is signaled.
Wake on LAN occurs.
36 ThinkPad 390X / i 1700 HMM