Filter
Top Products
Display menu
To access the Display menu settings, press the Menu/Select button to display
the Main menu, press the down arrow to highlight Display, then press
Menu/Select again to access the Display menu.
Keystone
This option helps to keep the image square as the angle of projection. Use this
feature to adjust the image vertically and make a square image. See “Keystone
(remote only)” on page 17 for details on keystone adjustment.
Press the down button to highlight Keystone, then press Menu/Select. Use the
up and down arrows to adjust the keystone setting. Press Menu/Select to
accept your changes.
Brightness
Adjusting the brightness changes the intensity of the image. Use the up and
down arrows to highlight Brightness, press Menu/Select, use the arrows to
adjust the brightness, then press Menu/Select to accept your changes.
Contrast
The contrast controls the degree of difference between the lightest and darkest
parts of the picture. Adjusting the contrast changes the amount of black and
white in the image.
Use the up and down arrows to highlight Contrast, press Menu/Select, use
the arrows to adjust the contrast; then press Menu/Select to accept your
changes.
Tint
The tint adjusts the red-green color balance in the projected image.
Chapter 2. Using the projector 19