Filter
Top Products
8. Paste new tape for digitizer 1 and digitizer base
tape 2 on the bottom side of the computer side, and
then remove the other one3.
Right-handed model to left-handed model
Left-handed model to right-handed model
9. Install the system-digi cable to the new Endurimer or
leather cover. (See “1100 Endurimer and system-digi
cable” on page 85.)
Note: When replacing the Endurimer or the
system-digi cable, make sure that the black
connector of the system-digi cable is attached
to the computer and the white connector is
attached to the digital notepad assembly.
(continued)
Removing and replacing a FRU
128 ThinkPad TransNote