Filter
Top Products
3. Select Password, using the cursor keys to move down
the menu.
4. Select Hard-disk x password, where x is the letter of
the hard-disk drive. A pop-up window opens.
5. Select either User HDP or Master HDP.
6. Enter the master HDP; then leave the New Password
field blank and press Enter twice.
7. Press F10.
8. Select Yes in the Setup Configuration window.
Both user HDP and master HDP have been removed.
Power management
To reduce power consumption, the computer has three
power management modes: screen blank, standby, and
hibernation.
Screen blank mode:
In screen blank mode, the following occurs:
v The LCD backlight turns off.
v The hard-disk drive motor stops.
v The speaker is muted.
To enter screen blank mode, press Fn + F3. To end screen
blank mode and resume normal operation, press any key.
Standby mode:
When the computer enters standby mode, the following
events occur in addition to what occurs in screen blank
mode:
v The LCD is powered off.
v The hard-disk drive is powered off.
v The CPU stops.
To enter standby mode, do any of the following:
v Press Fn + F4.
v Close the ThinkPad TransNote computer. (To prevent
the computer from entering standby mode when the
computer is closed, click Will not suspend even if LCD
is closed in the Power Management Properties window.
Then only the LCD turns off.)
In certain circumstances, the computer goes into standby
mode automatically:
v If a “suspend time” has been set on the timer, and the
user does not do any operation with the keyboard, the
TrackPoint, the hard disk, the parallel connector, or the
diskette drive within the time set.
v If the ac adapter is plugged in.
Related service information
24 ThinkPad TransNote