Filter
Top Products
1070 Digital-pen holder kit
For a right-handed model
Step Screw (quantity) Screw cap Torque
1 M2.5 × 3 mm,
nylon-coated (2)
39.2 Ncm
(4 kgfcm)
3 M2.5 × 3 mm,
nylon-coated (1)
39.2 Ncm
(4 kgfcm)
When installing:
When installing part A in the preceding figure, fit the
screw-hole plate and the claw into the square holes on the
bottom side of A (a) and then slide A in the direction
of the arrow b. Then tighten the screw.
(continued)
v Battery pack (1010)
Removing and replacing a FRU
ThinkPad TransNote 75