Filter
Top Products
Fn key combinations
The following table shows the function of each combination
of Fn with a function key.
Key
combination
Description
Fn+F1 Reserved.
Fn+F2 Reserved.
Fn+F3 Turn off the computer display, leaving the
screen blank. To turn the computer display on
again, press any key or press the TrackPoint
pointing stick.
Fn+F4 Put the computer in standby mode. To return to
normal operation, press the Fn key only,
without pressing a function key.
Note: This combination of keys functions as a
sleep button. The setting can be changed so
that pressing it puts the computer into
hibernation mode or even shuts the computer
down.
Fn+F5 Control the power source of the built-in
Bluetooth wireless device. This combination of
the keys functions as a toggle switch of the
power state.
Note: In Windows 2000 or Windows XP, this
combination of keys enables or disables the
built-in wireless networking features (the IEEE
802.11 standard) and the Bluetooth wireless
features. To use this function, the following
drivers must be installed.
v IBM ThinkPad Power Management driver
v OnScreen Display utility
v Wireless device drivers
Fn+F6 Reserved.
Fn+F7 Switch a display output location
v External monitor (CRT display)
v Computer display and external monitor (LCD
+ CRT display)
v Computer display (LCD)
Note:
For any operating system other than
Windows 2000 or Windows XP, no additional
procedure is needed; just press Fn+F7.
Notes:
1. This function does not work when different
desktop images are displayed on the
computer display and the external monitor
(the Extend desktop function).
2. This function does not work while a DVD
movie or a video clip is playing.
3. For Windows 2000 or Windows XP, a
hotkey application might take over the
switching function.
(continued)
Product overview
52 R50/R50p, R51 Series