Filter
Top Products
Problem: The mouse or pointing device does not work.
Solution: Make sure that the TrackPoint is enabled in the ThinkPad
Configuration Program, and then try using the TrackPoint. If the TrackPoint
works, the error might be due to the mouse.
Make sure that the mouse or pointing-device cable is securely connected to
the computer via the ThinkPad Port Replicator.
If your mouse is incompatible with the IBM PS/2
®
mouse, disable the
TrackPoint, using the ThinkPad Configuration Program.
Note: For more information, see the manual supplied with the mouse.
Problem: The mouse buttons do not work.
Solution: Change the mouse driver to Standard PS/2 Port Mouse, and then
reinstall IBM PS/2 TrackPoint. Drivers are provided in the
C:\IBMTOOLS\DRIVERS directory on your hard disk drive. If your hard disk
drive does not contain device drivers, refer to the ThinkPad Service &
Support Web site. To access this Web site, open Access ThinkPad by pressing
the ThinkPad button, then click the Service & Support image on the right of
the screen.
Problem: The scrolling or magnifying glass function does not work.
Solution: Check the mouse driver in Device Manage window, and make sure
that the IBM PS/2 TrackPoint driver is installed.
Standby or hibernation problems
Problem: The computer enters standby mode automatically.
Solution: If the processor reaches a temperature that is too high, the computer
automatically enters standby mode to allow cooling and to protect the
processor and other internal components.
Problem: The computer enters standby mode immediately after Power-On
Selftest (POST) (the standby indicator light turns on).
Solution: Make sure that:
v The battery pack is charged.
v The operating temperature is within the acceptable range. Refer to
“Specifications” on page 5.
If these items are correct, have the computer serviced.
Solving computer problems
Chapter 2. Solving computer problems 17