Filter
Top Products
Table 27. Removal steps of the hinge
1
1
Step Screw (quantity) Color
Torque
1
M2.5 × 6 mm, wafer-head, nylon-coated (2)
Black 0.392 Nm
(4 kgfcm)
Detach the hinge from the LCD rear cover, and gently pull the cables out through the guide hole in the hinge. Pull
them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be
damaged by the cable guides, or a wire to be broken.
3
3
2
2
2040 LCD panel and LCD cable
For access, remove these FRUs in order:
• “1010 Digitizer pen” on page 61
• “1020 Battery pack” on page 61
• “1050 Hinge caps” on page 66
• “1060 Keyboard” on page 67
• “1070 Palm rest” on page 70
• “1090 PCI Express Mini Card for wireless LAN/WiMAX” on page 74
• “1100 PCI Express Mini Card for wireless WAN” on page 76
• “1120 Keyboard bezel” on page 79
• “1130 LCD assembly” on page 82
Chapter 8. Removing and replacing a FRU 99