IGo Direct Bluetooth Keyboard Mouse User Manual


 
Setting up the Keyboard
Before You Begin
Before you install the Stowaway keyboard software for Symbian UIQ mobile
devices:
¾ Disable or remove any other keyboard applications that you have
previously installed on your mobile device. (Refer to the User’s
Guide included with your mobile device for instruction on how to do this.)
¾ Ensure there is at least 250 KB of memory on your mobile device.
¾ Insert the 2 AAA batteries (included) beneath the battery cover of the
Stowaway keyboard.
Installing the Software
The keyboard application can be installed from the accompanying CD or if
your device has internet access it can be downloaded directly by browsing to
the website: www.thinkoutside.com. The website will automatically detect
the type of device and offer the correct driver for download. After
installation, the keyboard driver icon will appear in the Applications list.
NOTE: Be sure to install the driver to Phone Memory.
Method 1: Sync a connection between the computer and your Symbian UIQ
mobile device using the phone’s sync cable.
A. Insert the CD-ROM into the CD-ROM drive on your PC. Click on the
buttons: Stowaway > Symbian > UIQ > English > Keyboard Driver.
B. If necessary, launch the .SIS file to begin installation.
Method 2: Launch the installation from a Flash Memory card.
A. Transfer the .SIS file to a memory card.
B. Launch the .SIS file to begin installation.
Method 3: Beam the driver via Infrared or Bluetooth.
A. Right click the .SIS file.
B. Select Send To Bluetooth device and find your device in the list.
C. Keyboard driver will appear in the phone’s Inbox.
D. When prompted select Yes then Install.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 3